TEKNOLOJİ etiketine sahip kayıtlar gösteriliyor. Tüm kayıtları göster
TEKNOLOJİ etiketine sahip kayıtlar gösteriliyor. Tüm kayıtları göster

7 Mart 2009 Cumartesi

VSEP



VSEP Membrane Cleaners In addition to filtration systems, New Logic manufactures a complete line of chemical cleaners designed to maintain maximum flow rates in all VSEP applications.Years of exhaustive research and development by New Logic engineers have resulted in seven chemical cleaners formulated to attack the most stubborn foulants across a wide range of membranes and feed streams.While designed for VSEP membrane filtration systems, these advanced formulas are perfect for cleaning any membrane.To learn more about VSEP Advanced Cleaning Solutions, please choose a link below to visit our sister site http://www.membranecleaner.com/.






While membrane-based separations of liquids from solids have enjoyed increasing popularity over the last 20 years, the technology has an inherent Achilles heel that affects all membrane devices: fouling. This long-term loss in throughput capacity is due primarily to the formation of a boundary layer that builds up naturally on the membranes surface during the filtration process.In addition to cutting down on the flux performance of the membrane, this boundary or gel layer acts as a secondary membrane reducing the native design selectivity of the membrane in use.

2 Mart 2009 Pazartesi

DDR-150 Rotary Positioning Stage

Direct drive brushless DC servo motor
Precision ground ABEC-7 4-point contact bearings
Durable stainless steel top plate with through hole
Resolution to 0.2 arc seconds
Highly repeatable Hall effect home and limit switches
Optional encoder scale cover
Ideal for:
Wafer Inspection
Precision Assembly
Laser Machining


Low Profile Direct Drive Rotary StageAnorad's new DDR-150 rotary positioning stages are designed for precise position and velocity control in light to medium force applications. High performance is achieved through use of a brushless DC servomotor, high resolution optical encoder and precision bearing set all housed in a compact and precisely machined aluminum base with a rugged stainless steel top plate.

The direct drive servo control of the brushless DC motor has several advantages over conventional gear driven rotary stages. Backlash is eliminated, torque variation is minimized, plus gear and brush wear are no longer factors in long term usage. Added benefits include speeds up to 360 rpm, 0.2 arc second resolution and ±1 arc second repeatability. Step-and-settle time is also reduced due to increased servo bandwidth.
Available options for the DDR-150 include a variety of encoder resolutions to meet your speed and accuracy requirements. An axial through hole for use with pneumatic or optical devices; adjustable home, limit and hardstop positions; and a sheet metal cover to protect the encoder and internal components.

Specifications
Parameter
Specification
Parameter
Specification
Travel
unlimited
Maximum Velocity2
1273 rpm
Accuracy
±20 arc sec
Acceleration
34 rad/s2
Repeatability1 (bi-directional)
±1 arc sec
Axial Capacity
25 kg
Resolution1
0.214 arc sec
Axial Runout (TIR)
5 µm
Stability
±2 counts
Radial Runout (TIR)
5 µm
Minimum move1
0.5 arc sec
Wobble3
±8 µm
Peak Torque
7.4 Nm
Thru Hole diameter
35 mm
Continuous Torque
1.4 Nm
Concentricity (Thru hole)
±2 µm
Inertia
0.217 kg-m2
Stage Weight
3.5 kg

DDR-150 Construction
Mechanical Features
Stationary Base
High strength aluminum alloy with black anodized finish (Nickel plating optional)
Rotating Table
Stainless steel with passivated finish
Bearing System
ABEC-7 precision ground 4-point contact radial bearing
Encoder
Incremental optical encoder with reflective tape scale (50 lines/mm)
Limit Switches
Hall effect home and limit switches


With 0.214 arc sec resolution (256x multiplication)
At lowest resolution (top speed dependent on controller and resolution)
Measured at 60mm radius

Free Modbus Scanner

Powered by DAQFactory, the QuickMod Modbus scanning tool allows you to quickly monitor a group of addresses from your Modbus device connected over ModbusRTU on RS-232 / RS-422 / RS-485, ModbusRTU over Ethernet, or ModbusTCP. You can read Coil and Input status, and Input and Holding registers in various data forms from standard 16 bit integer words to floating point values. You can even view a graph of any one of your addresses.
Best of all its free! QuickMod was developed by AzeoTech using DAQFactory Developer and therefore runs without any license fee on any DAQFactory installation, including a DAQFactory trial. Once the trial period is over, QuickMod will still work!
Plus, if you decide to purchase a DAQFactory license, you can modify the QuickMod application for your own use, adding new screens, reading more inputs, controlling outputs, logging the data, creating automation loops, generating emails, and any other of the many features available in the various versions of DAQFactory. To get QuickMod, click on the link below to download the DAQFactory trial. QuickMod requires DAQFactory but will continue to work even after the 25 day DAQFactory trial expires.
window.google_render_ad();

Recover, Repair, Recycle

Add Scanning Capabilites to Your Huntron Tracker Model 30 SystemTracker Model 30 shown with Scanner II underneathAdding a Huntron® Scanner to your Tracker Model 30 system lets you access components using standard DIP clips and cables, custom cables to PCB connectors or interface to a bed-of-nails.You can compare one component with another in real-time (64 pins max.) or use your PC to automate testing and scan up to 128 pins.Huntron Scanners can be used with a Huntron Access Prober to provide Common line connections while the Prober is probing a PCB. This method gives you up to 128 selectable Commons to use. For example, you can connect the Scanner to a connector on a PCB mounted in the Prober using a common ribbon style cable. While the Prober is probing, any one of the lines on the connected ribbon cable can be selected as the Common reference. This would provide you true point-to-point testing capabilities.Note: The ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to commercial sales only.Scanner II and Scaner 31S users may want to consider these Optional Accessories to enhance their test capabilities.Highlights:The Scanner II and Scanner 31S accessories add scanning capability to the Tracker Model 30All Scanners have a minimum 64 pin capabilityThe Scanner II can scan up to 128 pins when the A and B channels are combinedThe Scanner 31S use standard IDC style connectorsThe Scanner II uses the common SCSI-2 (68 pin) style connectorsUp to 8 Scanner IIs can be “daisy-chained” to increase the available number of test pinsSelecting Accessories for your Scanner IIThe Scanner II accessories for interfacing to your printed circuit board come "ala carte". This means that you select the accessories you want included with your Scanner. Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter required with Scanner II) or a mutli-pin breakout cable. Details on these accessories are provided on this page.SpecificationsMax. Number of Test pinsScanner IIScanner 31SProTrack Scanner128 (per Scanner)64128 (both channels combined)Number of ChannelsScanner IIScanner 31SProTrack Scanner212Number of Pins per ChannelScanner IIScanner 31SProTrack Scanner646464Front Panel ConnectorsScanner IIScanner 31SProTrack ScannerSCSI-2 (68 pins)IDCIDCPart NumberScanner IIScanner 31SProTrack Scanner99-039399-039999-0098Dimensions (Scanner II and 31S)11.1in W x 1.8in H x 8.6in D(28.2cm W x 4.6cm H x 21.8cm D)CertificationsCE and ETL listedWarranty1 year limitedSupplied Accessories with ScannersHuntron P/NQtyDescriptionAvailable Online?All Scanners06-52171Manuals CDScanner II98-04801Interface Cable-Scanner 31S98-01031Cable Assembly, 20 pin clip98-01021Cable Assembly, 40 pin clip07-12341Clip, 20 pin-07-12301Clip, 40 pin-98-04801Interface Cable

Biomedical Sample Handling

Multi-axis X-Y linear motorized positioning stageABTech inc's Mini X-Y Linear Motor stage combines Copley Controls, Thrust Tube "Micro" series linear motors with non-contact linear encoders and precision mechanical guideway bearings to produce a unique lightweight, low mass and low profile, linear motor positioning stage.This design incorporates the linear motors coil (forcer) as the stages workholding carriage while the linear mechanical guideway bearings provide load support, travel straightness and orthogonality for accurate positioning and repeatability.The Thrust Tube linear motors are electrically identical to conventional brushless DC motors making them compatible to most third party brushless drives.These mini X-Y stages are ideally suited for pick-and-place or point-to-point positioning applications such as biomedical sample handling or inspection.ABTech's modular design approach and full engineering services can respond quickly to provide a solution to your O.E.M. needs for ultra-precision linear motion.
Features
Thrust Tube "Micro" series brushless DC linear motors
Precision linear mechanical guideway bearings
Non-contact linear encoders
Position accuracy & repeatability: ±0.000080" (±2.0µm)
Motor drive amplifiers
Motion controllers
Custom bases
Complete turn-key systems
Modular design

1 Mart 2009 Pazar

Custom Stack Analysis

Custom Stack Analysis, LLC., was originally established in Alliance, Ohio, in 1965 by Mr. Ernest Kolm. In the year 2000, the company was acquired by Mr. James K. Gray, who has over 18 years experience in the field of air emissions testing. In the year 2005 Custom Stack Analysis, LLC. acquired the source testing assets of Envisage Environmental, Inc. Custom Stack Analysis, LLC. has capabilities for performing Stack Testing, Industrial Hygiene, Analytical Services, Burner Combustion Efficiency, Radon Testing and Indoor Air Quality. The company has performed work not only for small companies, but also many fortune 500 companies. A professional staff can ensure that any of your environmental needs are met with quality and competitive pricing.Custom Stack Analysis, LLC., has been providing air emissions testing for the past 38 years. In this time, they have performed testing for many prominent clients, such as Stericycle, Inc., Goodyear Tire & Rubber Co., and WCI Steel, along with many other prominent companies. The company has extensive knowledge in testing for medical waste incinerators, printing operations, steel foundries, asphalt facilities, power plants, petroleum refineries, chemical plants, brick manufacturers, lumber processing, hazardous waste incinerators, rubber manufacturing, roofing production, plastic manufacturers, and many other types of operations. The company has also been providing its services to engineering companies, government agencies, and control system designers. The company has experience providing services internationally including Canada, Puerto Rico, Jamaica, Dominican Republic, Caribbean Islands and South America. If you have an international project that requires our services be sure to give us a call. In 2009 Custom Stack Analysis, LLC. joined a service alliance with Zaff International/Hi-Tech Ltd. for providing services in Saudi Arabia and the Gulf Coast countries.Custom Stack Analysis, LLC., has an excellent performance reputation in working with many prominent Clients in Ohio and throughout the United States. The company is noted for its ability to deliver quality services in accordance with project schedules, and to provide responsive assistance to Clients in emergency situations.Custom Stack Analysis, LLC., has a company policy of providing high quality services to clients. The company also has a strong commitment for safety on the job for its work force, which includes USEPA's safety, health, and environmental management training program for field activities for all employees.Custom Stack Analysis, LLC., is an active member in the Air & Waste Management Association, Source Evaluation Society, Ohio Chamber of Commerce, and Carolina Air Pollution Control Association.

27 Şubat 2009 Cuma

THE LAST DAYS OF PRIVACY

As technology makes life richer and easier, we leave a trail of information that is susceptible to prying eyes


Within the next four months, a major Bay Area supermarket chain plans to introduce a payment system that uses biometric fingerprint authentication to verify customers' identities. Under this system, shoppers in checkout lines won't need to use cash, checks, debit cards or credit cards. Instead, they can place their fingers on scanners that read fingerprints, and once the device links to their bank or credit card accounts, they can buy groceries, get cash back and do everything else shoppers do.



Images
View Larger Images

--------------------------------------------------------------------------------

More Opinion
Clinton first looks east 02.21.09
Terrorism as a crime 02.21.09
Past the point of no return 02.20.09
The end of a budget battle 02.20.09
<_script><_script>

--------------------------------------------------------------------------------

[Podcast: Insight Editor Jim Finefrock and reporter Jonathan Curiel talk about how Americans might as well face up the fact that there is little privacy left.]

The system is already used in cities around the United States, including Portland, Ore., and Chicago, where one shopper says it has changed his life for the better. Linc Thelen, a 37-year-old interior designer, says the fingerprint system -- known commercially as Pay By Touch -- is convenient to use and expedites his way through grocery lines at Jewel-Osco, where he shops. Thelen says the system lets people leave their wallets behind, so they don't have to worry about being robbed or losing their credit cards.

"I had no reservation," Thelen said in a phone interview. "It's a safe way to store information."

But no system is 100 percent foolproof.

Despite the fact that armed men guard the computers that store the customers' virtual fingerprints, despite the fact that Bank of America's former security chief now heads Pay By Touch's security division, and despite the fact that Pay By Touch hires people to try to expose vulnerabilities in its computer system (so those vulnerabilities can be eliminated), Pay By Touch President John Morris acknowledges that "it's not impossible" for computer hackers to figure out how to tamper with its information.

And therein lies one of the 21st century's most vexing problems: More and more of our personal data are captured and stored by corporate and government interests, and are potentially available to anyone with the technological, legal or financial means to access that information.

Whether it's phone calls we make, library books we check out, CDs we buy on the Internet or divorces we finalize in court, we leave a trail of information that becomes susceptible to prying eyes. For the price of a bus pass, you can pay a company to supply anyone's address, phone number, political affiliation, estimated income and property history. For $20 more, you can find out if that person is married or divorced, has a criminal record, and what sort of jobs he or she has worked.

Sen. Hillary Clinton, D-N.Y., says she will introduce a "privacy bill of rights" because identity theft and security failures of personal records have become "one of the most important issues facing us as individuals and as a nation."

The availability of personal information -- downloadable onto laptop computers, which are increasingly being fitted with fingerprint technology -- is changing the culture in ways that may seem trivial but are really benchmarks for a new society already in its formative stages.

A small example: Unbeknownst to the men who date her, Judy runs background checks on all of them, using a private investigator to dig out any "red flags" that would presage troubling behavior. A businesswoman in Southern California, Judy, 50, uses a company called DateSmart, whose client base has boomed in the past five years as more people confront the perils of online dating.

"I'm glad the information is out there," says Judy, who did not want her last name used because of concerns her suitors would read this article. "The men I'm talking to online are complete strangers. And I have absolutely no knowledge of their character other than what they're saying in their profiles. I need to feel comfortable knowing that they're not an ax murderer. The people you meet might be well dressed, but you never know if they have any criminal history. It's for (my) safety."

Background checks are nothing new. What's changed are the speed with which you can obtain them, their relatively small price (some companies advertise free checks) and their growing public acceptance. The information revolution has transformed the background check into a common and casual tool, and those being scrutinized probably don't have a clue. More obvious are the security cameras embedded in nearly every major American city, including New York, Milwaukee, Chicago, Atlanta, Los Angeles and, yes, San Francisco, where lenses record people's activities in such crime-ridden neighborhoods as Bayview-Hunters Point and the Western Addition. The spread of these cameras is championed by authorities, who say it reduces criminal activity, and criticized by the ACLU, which says the equipment is an unnecessary intrusion into public spaces.

Civil liberties groups have joined the widespread outcry against the government's monitoring of Americans' phone-call records. Two weeks ago in federal court, the ACLU challenged the legal rationale behind the National Security Agency program, arguing that the NSA's actions -- involving "data mining" of records provided by AT&T and other telephone companies -- violate Americans' rights to free speech and privacy as guaranteed under the First and Fourth Amendments. Last week, privacy experts raised questions about the U.S. government's monitoring of international bank transfers -- previously secret data surveillance officials say is justified by the fight against terrorism.

Americans' rights to privacy will be tested even more in the next few years as biometric technology creeps increasingly into everyday arenas. For example, on the campus of UC San Diego, biometric experts are testing a soda machine that uses both fingerprint and face-recognition technology. The machine is in a lounge for grad students in UC San Diego's computer science building.

"The students are very excited about getting it working," Serge Belongie, a UC San Diego associate professor of computer science, says in a phone interview. "People think it's very cool. ... No one uses money. They have accounts. What would be fun is if (the machine) recognizes you and says, 'Would you like your usual?' "

If UC San Diego students are reluctant to use the machine, their privacy concerns are outweighed by convenience -- a sentiment echoed in survey after survey on biometric technology. In March, Unisys Corp. released a report on public perception of "identity management" that said convenience and efficiency were the two biggest reasons consumers would use biometric technology. (The most preferred biometric methods are fingerprints and voice recognition, according to the survey. The least preferred, because of its perceived intrusiveness, is an iris or eye scan.)

Two of the biggest turnoffs for those who shun biometric technology: suspicion of how the technology works and loss of privacy. Among respondents from North America, just 56 percent said they'd be willing to share their fingerprint with a government organization such as a post office or tax authority. Among respondents from the Asia-Pacific region, 71 percent said they'd share their fingerprint with the government.

"As consumer confidence grows in the large-scale usage of (biometric technology) and standards are more generally comfortably adopted, you're going to see a pretty rapid migration" to it, says Mark Cohn, Unisys vice president for homeland security solutions.

Cohn, a principal architect of the Department of Homeland Security's US-VISIT Exit system, which uses fingerprint technology to run background checks on visa applicants and verify their entry to and arrival from the United States, says Malaysia offers a preview of how the United States may change in the coming years.

Since 2001, the Malay government has issued a biometric "multipurpose card" to Malaysians 12 years and older. The card, which features a thumbprint and photograph, acts as a passport, driver's license, ATM card, toll and parking pass, and medical record that lists blood type and any allergies.

The card is convenient to use -- but it's a nightmare for Malaysians who lose it or have it stolen. Crime syndicates in Malaysia have altered cards with different photographs and used them to give members new identities, though the Malay government insists these identity thieves can't access the original cardholders' personal information. Special chip technology and other password features prevent this, they say. Also, the cardholder's fingerprint -- rather than being visible on the card -- is encrypted in the card itself: To reveal the fingerprint, the card must be inserted into a special biometric device that compares the encrypted print with that of the person claiming to be the cardholder.

For anyone who has read Orwell's "Nineteen Eighty-Four," where "telescreens" keep track of people's lives, this new biometric technology will seem like fiction come to life. It's showing up everywhere. By the end of this year, U.S. passport agencies hope to issue "electronic passports" with computer chips that have digital photos of the holders. With the help of face-recognition machines, airport security can compare a photo with the face of the passport holder. For two years, an American corporation, VeriChip, has sold government-approved electronic chips that are inserted under people's skin to give doctors instant access to patients' medical histories.

In 2008, as mandated by the Real ID Act, states plan to issue driver's licenses linked to a database that includes each license holder's photo and Social Security number. These licenses (civil liberties groups call them national identity cards) will likely include a biometric photo of the driver accessible by authorities.

In the meantime, banks are considering using iris scans and even palm scans at ATMs in an effort to cut down on fraud. (In 1999, Bank United in Texas adopted iris-scan technology at three of its ATMs in a test that was discontinued when Washington Mutual took over the bank.)

Some people love the new technology. Others shun it.

Pay By Touch admits it has encountered some resistance among shoppers it approached in supermarkets that already use the company's fingerprint service. But Morris, its president, says many of these customers are quickly won over by the convenience of Pay By Touch, which is free for consumers, and that the company keeps data points based on users' fingerprints, not actual fingerprints. So far, supermarkets in 40 states use the Pay By Touch system.

Pay By Touch, which is based in San Francisco, wouldn't say which Bay Area supermarket chain will start using its fingerprint system in the next four months -- only that the chain will use the system in just a handful of its Bay Area stores. Pay By Touch users sign up voluntarily and are under no obligation to use it at the checkout line.

Pay By Touch says it takes great care to safeguard its users' data. After fingerprints are converted into algorithms, they're encrypted, then stored in IBM computers. Those algorithms can't be reconverted into an exact copy of the fingerprint, though Pay By Touch may eventually store users' actual fingerprints if the technology improves, Morris says. The company insists it will never sell users' personal information or fingerprints to anyone else -- a pledge that's backed up in writing when users sign up with the company. But what if federal authorities, citing national security, insist on the finger scan and payment history of a Pay By Touch user?

Pam Dixon, who heads the World Privacy Forum, a public research group, went to Chicago to warn potential Pay By Touch users about possible dangers.

"It didn't stick," she says. "People were (more) concerned with (convenience than) the potential risks. People can put their thumb on a pad and be done with it. But meanwhile, their biometric data is sitting with another company, a third party, that's subject to subpoena. One argument that I made: Let's say that every supermarket in the country, particularly the large chains, (use) a biometric payment system. It's a law enforcement dream because who needs a biometric database run by the U.S. government when you've got one being run by private companies?"

Citing the recent disclosure by the Veterans Administration, which said a computer with credit information on millions of veterans had been stolen, Dixon says, "The second issue is information security. If the VA can't keep its records secure, which is a government agency that has all sorts of strict controls that are supposed to be in place, how on Earth can a private company without the resources of something like the VA manage to keep something secure? When we have a credit card stolen, we can call the credit card company and say, 'Give me a new number.' But you can't do that with your biometric. You can't say, 'Give me a new fingerprint.' "

Morris dismisses such concerns, saying that Pay By Touch will actually decrease the likelihood that consumers' credit information is stolen or misappropriated. "I think (Pay By Touch users) get pretty rapidly that it's the ultimate way to secure their private data," he says. "It connects (their accounts) to something that's uniquely them, as opposed to handing a credit card over to a stranger or writing a personal check that seven or eight humans touch before it gets in their statement. Securing information by a biometric is a giant leap forward. (Users) like that they don't have to pull their card out anymore. They (tell us they) like that they don't have to carry their (purses or wallets) through the parking lot of an urban supermarket. There's a physical security benefit. Their numbers are never displayed. The safety of securing their data is the No. 1 thing they like."

The marketplace will determine whether the public is ready to accept commercial fingerprint identification. Investors in Pay By Touch believe that day is here, capitalizing the company with $190 million in the past 12 months. More than 2.5 million shoppers already use the Pay By Touch system. Morris envisions a day when all stores -- even mom-and-pop ones -- offer a Pay By Touch option.

Soon, customers will be able to use Pay By Touch from home with the help of fingerprint readers attached to their computers. In ancient China, rulers would put their fingerprints on documents to give them an official seal. Artists would also mark their work with prints. It wasn't until the late 1800s that authorities realized they could use fingerprints to catch criminals. Their evolution as a way to pay for groceries is a 21st century twist fueled by technology. It's also a trade-off between privacy and convenience. Welcome to the brave new world in Aisle 5.

23 Şubat 2009 Pazartesi

Biomedical Sample Handling

Multi-axis X-Y linear motorized positioning stageABTech inc's Mini X-Y Linear Motor stage combines Copley Controls, Thrust Tube "Micro" series linear motors with non-contact linear encoders and precision mechanical guideway bearings to produce a unique lightweight, low mass and low profile, linear motor positioning stage.This design incorporates the linear motors coil (forcer) as the stages workholding carriage while the linear mechanical guideway bearings provide load support, travel straightness and orthogonality for accurate positioning and repeatability.The Thrust Tube linear motors are electrically identical to conventional brushless DC motors making them compatible to most third party brushless drives.These mini X-Y stages are ideally suited for pick-and-place or point-to-point positioning applications such as biomedical sample handling or inspection.ABTech's modular design approach and full engineering services can respond quickly to provide a solution to your O.E.M. needs for ultra-precision linear motion.FeaturesThrust Tube "Micro" series brushless DC linear motors Precision linear mechanical guideway bearings Non-contact linear encoders Position accuracy & repeatability: ±0.000080" (±2.0µm) Motor drive amplifiers Motion controllers Custom bases Complete turn-key systems Modular design

13 Şubat 2009 Cuma

ASC process systems


ASC is a leading manufacturer of specialized process equipment, control systems, and custom manufacturing software used in the composites, plastics, glass, solar, lumber, and concrete, coatings, and finishing industries. Our product lines include composite autoclaves, glass-laminating autoclaves, concrete autoclaves, industrial ovens, composite ovens, electroplating automation systems, process control software, autoclave control software, oven control software, and crane and hoist control software including scheduling. We're located in Los Angeles, CA and support thousands oAutoclaves and other equipmentASC manufactures a range of process equipment, including autoclaves, ovens, presses, heating systems, cooling systems, vacuum systems, and specialty pressure equipment. We also buy and sell used equipment.systems and hundreds of customers wControl & power systemsASC is a leading supplier of control and power systems for a wide variety of equipment and industries. We specialize in PC-based and PLC-based control solutions. Our PC-based systems typically feature our industry-standard CPC control software package.orldwide.Software for controls and manufacturingASC can develop custom software solutions for a wide variety of manufacturing applications. Our CPC software is the world's leading software for control of autoclaves, ovens, and many other applications. Our FLEXTIME software is also the leading PC-based solution for electro-plating and anodizing control

7 Şubat 2009 Cumartesi

FCI

You can count on FCI, as a leader in flex circuit connectors, for the most innovative and complete range of products in the industry. FCI offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.3mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that FCI has a solution for almost any application, no matter how demanding.

As your connection to innovation, FCI continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. FCI introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. FCI improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. FCI was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site.

IBM COGNOS 8CONTROLER

Overview

IBM Cognos 8 Controller provides Finance organizations with unmatched capabilities for managing the close, consolidation, and reporting process. An automated, menu-driven application that is owned and managed by Finance, IBM Cognos 8 Controller can consolidate diverse ledgers representing thousands of operating units and accounts into a common chart-of-accounts structure.

IBM Cognos 8 Controller reduces close cycle times and gives you the transparency that is essential for sustained compliance with Sarbanes-Oxley and IFRS. It supports local, regional, or global requirements, and enables you to adapt to business and regulatory changes in real time.

What IBM Cognos 8 Controller Offers to Finance Leaders
IBM Cognos 8 Controller offers critical benefits for the key members of your finance team—and for the CIO, who needs to ensure compatibility with existing IT investments:

  • For Corporate Controllers: IBM Cognos 8 Controller enables the corporate controller to automate the entire close process, from data collection to financial consolidation to output. Close cycle times are reduced while data integrity is assured.
  • For the CFO: IBM Cognos 8 Controller reduces risk and provides the CFO with an enterprise view of key financial ratios and results. Greater visibility improves strategic decision making across the organization, while the high quality of financial results eases external reporting and compliance.
  • For the CIO: IBM Cognos 8 Controller allows the CIO to leverage current IT investments while ensuring that centralized systems meet the demand for secure and reliable data. And it offers the opportunity for performance management standardization from a single vendor, with enterprise planning and business intelligence across a single architecture and platform.

IBM Cognos 8 Controller is the only solution that includes more than 200 pre-configured, standard reports to satisfy the demands of management and regulators. All the reports required at key stages of the close process are available automatically—no custom report creation is needed.

In addition, IBM Cognos 8 Controller is seamlessly integrated with IBM Cognos 8 Planning and IBM Cognos 8 Business Intelligence. It enables performance management to be integrated at the data, security and process level—all at a low total cost of ownership.

Learn more:

5 Şubat 2009 Perşembe

PEI-Genesis Offers -Industry Connectors with 48-hour Assembly Service (Formerly Litton Connectors)

PEI-Genesis Offers ITT VEAM Rail-Industry Connectors with 48-hour Assembly
Service (Formerly Litton Connectors)

VEAM CIR connector

VEAM connectors (formerly Litton-Veam) assembled in 48
hours.
PEI-Genesis is the world largest distributor of ITT’s VEAM
CIR and VEAM FR CIR (fire retardant) connector series of multipin circular
connectors. Now engineers and buyers in the rail sector obtain the exact
connector for their requirement in the shortest possible time and without the
burden of minimum order quantities; PEI-Genesis will happily build just one
connector if that is all you need

VEAM CIR Series Connectors
The basic design
parameters of the VEAM CIR series were derived from the MIL-C-5015 military
specification and enhanced by the addition of a positive-lock/quick-disconnect
bayonet coupling mechanism. High shock and vibration resistance is achieved
without the need for lock wires, and the connectors are rated for a minimum of
2000 couplings. VEAM CIR connectors are available in an enormous range of
styles, shell sizes and contact arrangements and can be supplied in a wide
variety of materials and finishes to suit the demands of each particular
application. It’s also intermateable with VG95234.

Add-ons for Veam Cir ConnectorsVEAM CIR series connectors for railroad industry
ITT Cannon’s VEAM CIR connectors can also be specified with
various inserts to meet low-smoke/zero-halogen requirements and provide superior
resistance to fuel oils, solvents and elevated temperatures. For more details,
call PEI-Genesis and talk to one of our applications engineers.

To check our inventory, input a part number in the bar above.

CDM ELECTRONİCKS




CDM Electronics is a certified small business, CCR# 42827, founded in 1993,
CDM Electronics' mission is to provide our customers with exceptional
interconnect products and value added services that meet or exceed our
customers' expectations. We welcome the chance to design a creative solution to
the most challenging issues.Our ProductsCDM Electronics is a NEDA Authorized
Supplier for electronic connectors, coaxial cables and other interconnect
products. This assures you that you are receiving factory new and approved
products. With today's ever changing business climate, particularly in light of
RoHS initiatives which transpired
in July 2006, it is imperative that your applications perform to specification
and in compliance with environmental and other government regulations. For those
applications not requiring RoHS compliance, there are still several performance
and reliability factors that are compromised when superior products are not
deployed. Choose CDM for all of your interconnect sourcing requirements and you
are guaranteed excellent products with on time deliveries.Our ServicesIn 1999,
CDM management recognized that customers wanted access to thousands of parts in
stock ready for same day shipment. But this only represented half of our
customers' needs. Sowe embarked upon a program to expand our offering into the
arena of cable assembly and value added programs. Since that time, CDM has
experienced explosive growth and now provides a host of value added services,
from "womb to tomb". We provide quick turn engineering and cable assembly
services for prime contractors, as well as 2nd and 3rd tier providers. Our
satisfied customer list includes Northrop Grumman, BAE, General Dynamics, and
all branches of the United States military: Army, Navy, Air Force and
Marines.CDM credits our great staff, especially our brilliant engineering team,
with our enormous success in this area.Proactive Cost Reduction Program™Process
improvement and cost-saving solutions are as important to us as they are to you.
Our "Proactive Cost Reduction Program" is a trademarked initiative created by
CDM Electronics to constantly create cost-saving solutions for our customers.Our
PeopleFrom Reception to Shipping, CDM Electronics is proud to have the most
loyal & dedicated employees. But it takes more than just our own employees
to make our company great. We rely heavily on the expertise of several of our
providers, especially our web designers:

Recover, Repair, Recycle


Benefit from Huntron's 30 years of providing quality Diagnostic Tools for PCA Recovery
With today's val
id concerns for protection of our environment, the recovery, repair and recycling of printed circuit assemblies (PCAs) is a positive move towards sustainable environmental-friendly practices.
Huntron has been helping businesses troubleshoot and repair printed circuit assemblies for over 30 years. Repairing rather than discarding failed PCAs keeps the potentially harmful chemical components such as lead out of our world's landfills and disposal sites.
Below is a list of Huntron products to help you recover, repair and recycle PCAs:
• Huntron Tracker 2800
• Huntron Tracker Model 30
• Huntron TrackerPXI
• NFSA RF Prober
New Version of Huntron Workstation Available!
A new version of Huntron Workstation is now available for download. Go to the Workstation Support web page to download version 4.1.3273! Update December 22, 2008.
New Automated Near Field Signature Analysis
Combining the Huntron Access Robotic Probing Station, Huntron Workstation Software and the new Test Evolution (TEV) Non-Contact RF Near Field Probe with local synthetic measurement technology sets the standard for Near Field Signature Analysis (NFSA).
Placing the sensor, receiver and signal processing in one compact RF Probe assembly allows the sensing of EM fields emanating from RF circuitry. A specific position in a Near Field is defined as a Virtual Test Point™ (VTP) where a NFSA measurement is made. Identical circuits emanate nearly identical fields at the VTP. The combination of Huntron Prober and TEV RF Probe allows accurate positioning and measurement of VTPs. This provides the repeatability to measure VTP's from 200MHZ to 3GHZ on RF assemblies.
When used for test, an engineer examines the UUT schematic with an eye toward following the RF signal path. Using Huntron Workstation Software, points along that path are selected for Virtual Test Points (VTP). A set of known good boards are then scanned making and saving Near Field signatures at the VTP's. Unknown UUT's are scanned with the same VTP's against the saved signatures. Any deviation against stored signatures indicates areas of concern.
Near Field Signature Analysis (NFSA) is close proximity sensing of EM fields emanating from RF circuitry. Near Fields are close to active circuits with the strength dependent on power and circuit design. AC circuits radiate a unique frequency and magnitude “signature” being a function of frequency of operation, magnitude, distance to the test probe and geometric location of the probe.
The RF NFSA Prober will be available from Huntron to USA customers only in early 2009. Contact Huntron for more details on Near Field Signature Analysis.
Download the latest NFSA RF Prober brochure now!
Huntron Access USB Probers
The NEW Huntron Access USB Probers are the latest versions of the popular robotic probers used to automate testing of complex printed circuit boards. The Access USB Probers come in two sizes - the Access USB Prober can handle PCBs up to 19.4” by 14” and the larger Access 2 USB Prober can hold PCBs up to 22” by 23” in size. The new Probers come with a USB Probe Tip camera to monitor the probe placement as the test progresses. Both Probers uses linear encoders for incredible 20 micron accuracy. The new Access USB Probers can also be ordered with the Tracker Model 30 embedded inside the chassis for a space saving, all-in-one platform.
Download the latest Diagnostic Systems brochure now!
Huntron's flexible, automated diagnostic solutions help people solve circuit card problems.

Huntron was founded in 1976 with the introduction of the Huntron Tracker®, the pioneering troubleshooting tool that uses power-off signature analysis to identify component failures on printed circuit boards.

Today, Huntron's reputation in providing automated power-off diagnostics results in instrumentation and software for test, inspection and repair of electronic printed circuit assemblies.
As density and complexity increase, printed circuit assemblies become tougher to probe and test. Huntrom complements conventional test equipment with access and test tools that catch the elusive problems other test methods often miss. The keys are physical and virtual access, which translates into meaningful results such as shorther design cycles, improved production yield and lower warranty costs. When you need to test, diagnose or troubleshoot complex circuit boards, Huntron lets you access, explore and discover more.
Contact us for more information on how we can help solve your test and troubleshooting needs

High Flow Range Mass Coriolis



Ideal for the measurement of flow, density and temperature of liquids and slurries, such as aggressive or contaminated, sanitary or particle-filled fluids.

Features:

  • Flow ranges from 60 to
    60K Kg/Hr (2.2 to 1650 lb/min)

  • Accuracy up to 0.25% of reading

  • Materials: flow tubes -
    316 L, splitter flanges -
    316 Ti, housing - cast iron

  • Process temperature
    -40°F to 356°F

  • Ambient temperature
    -40°F to 140°F

  • Wide flow ranges

ACCURATE AND RELIABLE
This meter has the ability to
maintain high accuracy,
despite changing
viscosity conditions, with accuracy of +0.25% of reading.

EASY CLEANING

The ACM series has smooth stainless steel tubes and no moving parts, and is therefore very easy to flush and clean.

MULTI-TASKING
The ACM series of mass coriolis flow meters measure flow, density and temperature.

MATERIAL COMPATIBILITY

Because of the meter's 316 stainless steel flow tubes, the ACM series can measure a wide range of materials.

VARIETY OF ELECTRONICS

Electronics available for the ACM series include a local, hazardous rated display and a remote, panel-mount digital display.

Huntron Scanners

Add Scanning Capabilites to Your Huntron Tracker Model 30 System
Adding a Huntron® Scanner to your Tracker Model 30 system lets you access components using standard DIP clips and cables, custom cables to PCB connectors or interface to a bed-of-nails.You can compare one component with another in real-time (64 pins max.) or use your PC to automate testing and scan up to 128 pins.Huntron Scanners can be used with a Huntron Access Prober to provide Common line connections while the Prober is probing a PCB. This method gives you up to 128 selectable Commons to use. For example, you can connect the Scanner to a connector on a PCB mounted in the Prober using a common ribbon style cable. While the Prober is probing, any one of the lines on the connected ribbon cable can be selected as the Common reference. This would provide you true point-to-point testing capabilities.Note: The ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to commercial sales only.Scanner II and Scaner 31S users may want to consider these Optional Accessories to enhance their test capabilities.
Highlights:
The Scanner II and Scanner 31S accessories add scanning capability to the Tracker Model 30
All Scanners have a minimum 64 pin capability
The Scanner II can scan up to 128 pins when the A and B channels are combined
The Scanner 31S use standard IDC style connectors
The Scanner II uses the common SCSI-2 (68 pin) style connectors
Up to 8 Scanner IIs can be “daisy-chained” to increase the available number of test pins
Selecting Accessories for your Scanner IIThe Scanner II accessories for interfacing to your printed circuit board come "ala carte". This means that you select the accessories you want included with your Scanner. Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter required with Scanner II) or a mutli-pin breakout cable. Details on these
Huntron Scanners
Add Scanning Capabilites to Your Huntron Tracker Model 30 System
Adding a Huntron® Scanner to your Tracker Model 30 system lets you access components using standard DIP clips and cables, custom cables to PCB connectors or interface to a bed-of-nails.You can compare one component with another in real-time (64 pins max.) or use your PC to automate testing and scan up to 128 pins.Huntron Scanners can be used with a Huntron Access Prober to provide Common line connections while the Prober is probing a PCB. This method gives you up to 128 selectable Commons to use. For example, you can connect the Scanner to a connector on a PCB mounted in the Prober using a common ribbon style cable. While the Prober is probing, any one of the lines on the connected ribbon cable can be selected as the Common reference. This would provide you true point-to-point testing capabilities.Note: The ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to commercial sales only.Scanner II and Scaner 31S users may want to consider these Optional Accessories to enhance their test capabilities.
Highlights:
The Scanner II and Scanner 31S accessories add scanning capability to the Tracker Model 30
All Scanners have a minimum 64 pin capability
The Scanner II can scan up to 128 pins when the A and B channels are combined
The Scanner 31S use standard IDC style connectors
The Scanner II uses the common SCSI-2 (68 pin) style connectors
Up to 8 Scanner IIs can be “daisy-chained” to increase the available number of test pins
Selecting Accessories for your Scanner IIThe Scanner II accessories for interfacing to your printed circuit board come "ala carte". This means that you select the accessories you want included with your Scanner. Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter required with Scanner II) or a mutli-pin breakout cable. Details on these accessories are provided on this page.
accessories are provided on this page.

Control Devices and Relays

What is innovative about KOBUS? In contrast to conventional systems (such as current loop 4 - 20 mA), only a single 2-pole cable is laid, to which up to 240 sensors can be attached. In order to get the same effect with 4 - 20 mA, 240 cables would have to be laid. Obviously, the KOBUS system has a giant advantage just in wiring alone. In addition, it is advantageous that the sensor modules (initially for temperature, moisture, voltage, and current) developed by us are priced comparably to the 4 - 20 mA transducers, which means that there are also no additional expenses - as with other expensive bus systems - for the user.





Data protection on the KOBOLD website
Wewould like to inform you of which information we gather, how we useyour data and how we handle it. We consider the protection of this personal data to be very important.
We gather personal data from ourcontact form for ordering catalogues. We only use the data you providein handling your catalogue order, answering queries and processing orders. We of course also use this data for updating our address list.
Withthe exception of other KOBOLD enterprises, we will neither sell thisdata to third parties nor market it in any other way. We thus only useyour data for direct co-operation purposes and to notify you of our new products and solutions.
If you have any questions about this topicyou can also use our contact form at Order Catalogue. We will then contact you straight away.
As we further develop our pages and theInternet we will of course also continue to update this information,and publish any changes. You can therefore keep yourself regularlyupdated on our Data Protection page.

Yours sincerely
KOBOLD Messring GmbH

Control Devices and Relays

What is innovative about KOBUS? In contrast to conventional systems (such as current loop 4 - 20 mA), only a single 2-pole cable is laid, to which up to 240 sensors can be attached. In order to get the same effect with 4 - 20 mA, 240 cables would have to be laid. Obviously, the KOBUS system has a giant advantage just in wiring alone. In addition, it is advantageous that the sensor modules (initially for temperature, moisture, voltage, and current) developed by us are priced comparably to the 4 - 20 mA transducers, which means that there are also no additional expenses - as with other expensive bus systems - for the user.





Data protection on the KOBOLD website
Wewould like to inform you of which information we gather, how we useyour data and how we handle it. We consider the protection of this personal data to be very important.
We gather personal data from ourcontact form for ordering catalogues. We only use the data you providein handling your catalogue order, answering queries and processing orders. We of course also use this data for updating our address list.
Withthe exception of other KOBOLD enterprises, we will neither sell thisdata to third parties nor market it in any other way. We thus only useyour data for direct co-operation purposes and to notify you of our new products and solutions.
If you have any questions about this topicyou can also use our contact form at Order Catalogue. We will then contact you straight away.
As we further develop our pages and theInternet we will of course also continue to update this information,and publish any changes. You can therefore keep yourself regularlyupdated on our Data Protection page.

Yours sincerely
KOBOLD Messring GmbH

Professional and Reliable


Caspar Weinberger and Klaus Kobold on the occasion of the TV
programm World-Business-Review, April 1999

KOBOLDMessring GmbH, one of the leading international
instrumentationengineering enterprises, was founded in 1980 by Dipl.-Ing. Klaus
J.Kobold. His excellent engineering knowledge led to the enterprise
soonestablishing itself in the market place due it patentable technology,high
quality products and superior service. The "KOBOLD" brand namesoon became
synonymous with quality and technological advance. In thefollowing years,
independent KOBOLD companies were established in numerous countries worldwide.


Theinternational group of companies is led by its president
and soleproprietor Klaus J. Kobold. The company's purpose is to
develop,manufacture and sell instruments for monitoring, measuring andregulating
the physical quantities of flow through, pressure, level and temperature.


Thedevices are used in virtually all sectors of industry. The
variety ofmeasurement methods available, and the rapid adaptation to
technicaladvances, are what ensure that the high
application-specificrequirements set in the various branches of industry are met
in full.The strong growth of the company is based on the ongoing widening ofthe
range offered and is due to the acceptance of the company and its products in
the world market place.

Research and Development


Ourdevelopment team solves even the most difficult measurement
problems.Our experienced engineers from the most varied specialist areas
usuallyfind an appropriate solution quickly. We often develop products
inco-operation with our customers and thus meet the market needsdirectly.

Our technical and engineering groups undertake developments
for field applications in KOBOLD laboratories and factory.

The technical knowledge, together with modern design and
development methods are available in our laboratories and factory.

Constant contact with users and the requirements that our
customers place on our products provide the basis for our success.

KOBOLD engineers develop and test in our own Laboratories and
test facilities what is necessary and reliable for practical use.


Nothing is left to chance. Every detail is the logical
consequence of achievement and use.


KOBOLD Messring-Patents

Ofthat we are justifiably proud. The years of experience and
thespecialist competence of our technicians, engineers and staff cannot be
better demonstrated than through our patents.

Through the years we have
gathered a respectable collection of patents.

These achievements are further proof to our customers that
KOBOLD is an innovative partner.
For us every new job is a new challenge.
Take us at our word and present your requirements to us.

Production and Quality Control


Plant Hofheim am Taunus - Germany

Our production plants in Germany and the United States of
America produce quality products you need. Optimised production pursuant to
recognised quality principles provides products that are

economical, highly reliable and have a long life.
''alıntı''

ASC completes "Worlds Largest Autoclave"

Go to ASC30x75 picture.

Statistics

Inside working diameter: 30ft. (9.26M)
Ouside diameter: 32ft. (9.88M)
Inside working length: 76 ft. (23.5M)
Overall length: 112 ft. (34.5M)
Vessel volume: 82,000 cu.ft.
Max temperature: 450F
Max pressure: 150 psig
Heating system: 40 million BTU/hr
Control system: CPC Level III
Weight: over 1,000,000 lbs.
Man-hours to construct: 65,000+

Click for larger image

Interior view

Image shows length and rear-mounted cooling coil/radiator which stands 20ft (6.2M) tall.

Click for larger image